Checking or Changing The IP Address On An NEC DSX phone system

Posted on by

These are instructions on checking or changing the IP Address On An NEC DSX phone system.

The IP address is used for programming when using the PC Administrator and also for VoIP (Voice Over Internet Protocol) applications.

Before beginning check with the LAN (Local Area Network) Administrator for an acceptable, static IP address on the LAN.

At any phone, with the handset down press INTERCOM # * # * and put in the password 632379.

  1. Press HOLD
  2. Dial 1104
  3. Press HOLD
  4. You will see the current IP address on the bottom line of the display
  5. Press HOLD
  6. Enter the new IP address using * in place of . (example: 192*168*1*250)
  7. Press HOLD
  8. Enter the new gateway information using the same method as above
  9. Press HOLD
  10. Enter the new Subnet Mask
  11. Press HOLD
  12. Now press the SPEAKER key several times until you return to the date and time on the LCD display.
NEC DSX Telephone Systems

NEC DSX Telephone Systems

Shop now